Great-planes Ultra E-Box - GPMP1004 User Manual download pdf

The ElectriFly

™

Compact E-Box was designed to use the Hobbico

TorqMaster

™

LC sealed battery (HCAP0800) or other sealed

batteries of the same size and to fit the Great Planes

ElectriFly

™

Triton

™

charger (GPMM3150) or the Hobbico Quick Field Charger

™

MKII (HCAP0290). Fitting any other charger may require

modifications to the box.The battery connectors on the chargers will

also need to be changed to banana plugs (HCAP0310).

❏ 1. Slide the sealed battery into the bottom of the Compact

E-Box, connect the spade connectors to the battery and replace

the hatch screws. Note the polarity of the battery (red spade

connector goes with red wire and positive battery terminal).

❏ 2. Spread the sides of the box slightly, to allow the charger to

slide down, then slide the charger into position.

Note: If using the Triton charger, glue in the square spacer as

shown.Also, change the alligator clips to banana plugs (HCAP0310).

❏ 3.Install the handle and the screws.Cut the charger’s battery wire

to length and solder banana plugs on it. Plug the charger in. Be

certain to match wire and plug colors to respect polarity. To turn the

Triton charger off, unplug one of the leads.

Get Your Box Ready to Use

Recommended Accessories

COMPACT

E-BOX

™

The ElectriFly™Compact E-Box was designed to use the Hobbico®TorqMaster™LC sealed battery (HCAP0800) or other sealedbatteries of the same size and to

No comments

Great-planes Ultra E-Box - GPMP1004 User Manual